USWLogo2.jpg
 
The US Welder Home
 
Archer Tools
 
Atlas Industries
 
Goss Gas Equipment
 
Magsafe Safety glasses
 
Goss Accessories
 
Goss Air Products Style Tips
 
Goss Air-Acetylene Equipment
 
Goss Air-Propane Equipment
 
Goss Airco/Concoa Style Tips
 
Goss Cutting and Welding Tips
 
Goss Ham-Glazing Equipment
 
Goss Harris Style Tips
 
Goss Marquette Style Tips
 
Goss Meco Style Tips
 
Goss Nitrogen Equipment
 
Goss Oxweld Style Tips
 
Goss Oxy-Fuel Equipment
 
Goss Rego Style Tips
 
Goss Regulators
 
Goss Shrink Wrapping Equipment
 
Goss Smith Style Tips
 
Goss Victor Style Tips
 
The US Welder Policies
 
Your Shopping Cart
Goss Roofing Products

Made in the U.S.A.
Glenshaw, Pennsylvania
ap111.jpg GSAP-111M - TORCH, w/BP-66 Igniter tip
$163.40 $119.50 On Sale!
GSAP-111M
Goss AP-111M torch is 30 inches in length and has the BP-66 - push button - tip. The AP-111M is a torch for applications requiring large volumes of heat. At the squeeze of a lever, operator can go from pilot flame to a full-brush flame. Piezoelectric Tip not shown.
Quantity   
ap54.jpg GSAP-54 - TORCH HANDLE, w/Pilot valve
$106.90 $78.00 On Sale!
GSAP-54
The Goss AP-54 is designed for continuous or intermittent use. At the squeeze of a lever, the operator can go from a pilot flame to a full-brush flame as needed. Has adjustable pilot valve.
Quantity   
AP54P.jpg GSAP-54P - HANDLE, for steel extension
$106.90 $78.00 On Sale!
GSAP-54P
HANDLE, for steel extension
Quantity   
ap55.jpg GSAP-55 - TORCH, w/BP-5TE tip detail
$130.70 $95.50 On Sale!
GSAP-55
Goss AP-55 torch is 16 inches in length and has the BP-5TE tip. The AP-55 is a torch for applications requiring large volumes of heat. At the squeeze of a lever, operator can go from pilot flame to a full-brush flame.
Quantity   
AP-99R.jpg GSAP-99R - TORCH HANDLE, Rear valve
$70.80 $55.00 On Sale!
GSAP-99R
The Goss AP-99R has the same quality construction and versatile features as all Ready-Flame torches but without the pilot valve and lever flame control.
Quantity   
bp27e.jpg GSBP-2TE - TIP END, Pencil pt flame, 11 K BTU
$65.30 $52.25 On Sale!
GSBP-2TE
The Goss BP-2TE is 1 inch in diameter and puts out approx. 11,000 BTU's at 40 psi. These tips are to be used in combination with the AP-54 or AP-99R handles and the brass EX series extensions. The tip can be used with propane or mapp gas.
Quantity   
bp3te.jpg GSBP-3TE - TIP END, 7/8 dia, brush 14K BTU
$52.40 $42.00 On Sale!
GSBP-3TE
The Goss BP-3TE is 7/8 inch in diameter and puts out approx. 14,000 BTU's at 40 psi. These tips are to be used in combination with the AP-54 or AP-99R handles and the brass EX series extensions. The tip can be used with propane or mapp gas.
Quantity   
bp-4te.jpg GSBP-4TE - TIP END, 1-1/8 dia,brush,43K BTU
$48.40 $38.75 On Sale!
GSBP-4TE
The Goss BP-4TE is 1 1/8 inch in diameter and puts out approx. 43,000 BTU's at 40 psi. These tips are to be used in combination with the AP-54 or AP-99R handles and the brass EX series extensions. The tip can be used with propane or mapp gas.
Quantity   
bp-4te.jpg GSBP-5TE - TIP END, 1-3/8 dia,brush, 57 K BTU
$54.20 $43.50 On Sale!
GSBP-5TE
The Goss BP-5TE is 1 3/8 inch in diameter and puts out approx. 57,000 BTU's at 40 psi. These tips are to be used in combination with the AP-54 or AP-99R handles and the brass EX series extensions. The tip can be used with propane or mapp gas.
Quantity   
BP-66.jpg GSBP-66 - TIP END, Ignitor, 300K BTU
$91.00 $68.25 On Sale!
GSBP-66
The Goss BP-66 is 2 inch in diameter and puts out approx. 3000,000 BTU's at 40 psi. This tip end is made with a piezoelectric ignitor. These tips are to be used in combination with the AP-54 or AP-99R handles and the brass EX series extensions. The tip can be used with propane or mapp gas.
Quantity   
bp-6te.jpg GSBP-6TE - TIP END, 2 inch dia,brush, 300 K BTU
$57.10 $45.75 On Sale!
GSBP-6TE
The Goss BP-6TE is 2 inch in diameter and puts out approx. 300,000 BTU's at 40 psi. These tips are to be used in combination with the AP-54 or AP-99R handles and the brass EX series extensions. The tip can be used with propane or mapp gas.
Quantity   
bp-8te.jpg GSBP-8TE - TIP END, 3 inch dia brush, 300K BTU
$71.20 $55.25 On Sale!
GSBP-8TE
The Goss BP-8TE is 3 inch in diameter and puts out approx. 300,000 BTU's at 40 psi. These tips are to be used in combination with the AP-54 or AP-99R handles and the brass EX series extensions. The tip can be used with propane or mapp gas.
Quantity   
kp-25.jpg GSKP-25 - KIT, LP reg, soldering iron
$352.50 $257.50 On Sale!
GSKP-25
Goss Air-Propane Torch Kit includes (DP-11) soldering iron, (DP-9A) copper tip, (HEF-10) hose, (EP-80G) regulator and (MP-1) lighter.
Quantity   
DP-10.jpg GSDP-10 - SOLDERING IRON, Sm Chisel Copper
$181.10 $132.25 On Sale!
GSDP-10
The Goss DP-10 Soldering Iron features adjustable pencil point flame, durable steel construction, replaceable copper ends and a removable stand.
Quantity   
DP10A.jpg GSDP-10A - TIP END, Sm Chisel Pt
$37.10 $29.75 On Sale!
GSDP-10A
Replacement tip end DP-10A for soldering iron DP-11 - Small chisel 3/4 inches diameter. Copper only
Quantity   
dp-11.jpg GSDP-11 - SOLDERING IRON, Lg Pyramid PI
$194.10 $141.75 On Sale!
GSDP-11
The Goss DP-11 Soldering Iron features adjustable pencil point flame, durable steel construction, replaceable copper ends and a removable stand.
Quantity   
dp-9a.png GSDP-11A - TIP END, lg Pyramid Point
$55.60 $44.50 On Sale!
GSDP-11A
Replacement tip end DP-11A for soldering iron DP-11 - Large pyramid 1 1/4 inches diameter. Copper only
Quantity   
DP10A.jpg GSDP-12A - TIP END, Lg Chisel Point
$55.60 $44.50 On Sale!
GSDP-12A
Replacement tip end DP-12A for soldering iron DP-11 - Large chisel 1 1/4 inches diameter. Copper only
Quantity   
EP-70G.png GSEP-70G - REG FOR LP CYLINDER
$110.80 $80.75 On Sale!
GSEP-70G
GOSS PROPANE REGULATOR - Adjustable pressure from 5 to 60 PSI. Comes with a 0 to 60 PSI outlet pressure gauge, CGA-510 - POL inlet spud and nut and has a 9/16-18 left hand hose outlet
Quantity   
EP-80G.jpg GSEP-80G - REG, LP CGA 510 w/o Gauge B Hose
$99.90 $73.00 On Sale!
GSEP-80G
GOSS PROPANE REGULATOR - Adjustable pressure from 5 to 60 PSI. Comes without a pressure gauge. CGA-510 - POL inlet spud and nut and has a 9/16-18 left hand hose outlet.
Quantity   
ex-4b.jpg GSEX-12B - EXTENSION, 12 Bent Brass
$29.90
GSEX-12B
The Goss EX-12B is a bent 12 inch brass extension that is designed to be screwed onto the AP-54 or AP-99R handle with one of the tip ends added.
Quantity   
ex-4b.jpg GSEX-18B - EXTENSION, 18 Bent Brass
$37.10 $30.00 On Sale!
GSEX-18B
The Goss EX-18B is a bent 18 inch brass extension that is designed to be screwed onto the AP-54 or AP-99R handle with one of the tip ends added.
Quantity   
ex-4b.jpg GSEX-18DB - EXTENSION, 18 Double Bent
$51.40 $41.00 On Sale!
GSEX-18DB
The Goss EX-18DB is a bent double head 18 inch brass extension that is designed to be screwed onto the AP-54 or AP-99R handle with one of the tip ends added.
Quantity   
ex-4b.jpg GSEX-18DS - EXTENSION, 18 Double Straight
$51.40 $41.00 On Sale!
GSEX-18DS
The Goss EX-18DS is a straight double head 18 inch brass extension that is designed to be screwed onto the AP-54 or AP-99R handle with one of the tip ends added.
Quantity   
ex-4b.jpg GSEX-30B - EXTENSION, 30 Bent Brass
$81.20 $61.00 On Sale!
GSEX-30B
The Goss EX-30B is a bent 30 inch brass extension that is designed to be screwed onto the AP-54 or AP-99R handle with one of the tip ends added.
Quantity   
ex-4b.jpg GSEX-4B - EXTENSION, Bent Brass
$17.00
GSEX-4B
The Goss EX-4B is a bent 4 inch brass extension that is designed to be screwed onto the AP-54 or AP-99R handle with one of the tip ends added.
Quantity   
hef-5.jpg GSHEF-10 - HOSE, 10 ft propane B ftgs
$54.80 $43.75 On Sale!
GSHEF-10
The Goss HEF-10 is a 10 foot top quality flexible propane hose with a working pressure of 350 psi. This hose is not designed for use with Natural Gas. The hose comes standard with 9/16-18 LH hose fittings.
Quantity   
hef-5.jpg GSHEF-12 - HOSE, 12 ft propane B ftgs
$63.10 $50.50 On Sale!
GSHEF-12
The Goss HEF-12 is a 12 foot top quality flexible propane hose with a working pressure of 350 psi. This hose is not designed for use with Natural Gas. The hose comes standard with 9/16-18 LH hose fittings.
Quantity   
hef-5.jpg GSHEF-20 - HOSE, 20 ft propane B ftg
$94.70 $71.00 On Sale!
GSHEF-20
The Goss HEF-20 is a 20 foot top quality flexible propane hose with a working pressure of 350 psi. This hose is not designed for use with Natural Gas. The hose comes standard with 9/16-18 LH hose fittings.
Quantity   
hef-5.jpg GSHEF-25 - HOSE, 25 ft propane B ftg
$112.00 $81.75 On Sale!
GSHEF-25
The Goss HEF-25 is a 25 foot top quality flexible propane hose with a working pressure of 350 psi. This hose is not designed for use with Natural Gas. The hose comes standard with 9/16-18 LH hose fittings.
Quantity   
hef-5.jpg GSHEF-35 - HOSE, 35 ft propane B ftg
$157.50 $115.00 On Sale!
GSHEF-35
The Goss HEF-35 is a 35 foot top quality flexible propane hose with a working pressure of 350 psi. This hose is not designed for use with Natural Gas. The hose comes standard with 9/16-18 LH hose fittings.
Quantity   
hef-5.jpg GSHEF-6 - HOSE, 6 ft propane b ftgs
$37.90 $30.50 On Sale!
GSHEF-6
The Goss HEF-6 is a 6 foot top quality flexible propane hose with a working pressure of 350 psi. This hose is not designed for use with Natural Gas. The hose comes standard with 9/16-18 LH hose fittings.
Quantity   
KP350QH.jpg GSKP-350QM-H - KIT, LP REG - IGNITOR TIP
$397.30 $290.00 On Sale!
GSKP-350QM-H
GOSS MASTER COMBO KIT - Combination torch kit combines the 18 inch long heavy duty stand-up torch and newly designed detail torch with quick connect adaptors for fast torch changeover - Kit includes AP-111 and AP-55 torches, EP-80G regulator, HEF-25 hose, BRS-776M & F, and BP-66 ingnitor tip end.
Quantity   
kp-318-h.jpg GSKP-318-H - STEEL EXTENSION KIT
$253.90 $185.50 On Sale!
GSKP-318-H
This Goss Roofer's torch kit is made up of our popular AP-111 heavy duty torch, EP-80G regulator, HEF-25 hose and MP-1 spark lighter. It is perfect for stand-up full width fusing. Provides plenty of heat for any modified job.
Quantity   
kp-318-h.jpg GSKP-318M-H - STEEL EXTENSION KIT
$289.50 $211.50 On Sale!
GSKP-318M-H
This Goss Roofer's torch kit is made up of our popular AP-111 heavy duty torch with BP-66 ignitor tip end, EP-80G regulator, HEF-25 hose and MP-1 spark lighter. It is perfect for stand-up full width fusing. Provides plenty of heat for any modified job.
Quantity   
KP184H.jpg GSKP-184-H - KIT, LP reg, 2 extensions/tips
$305.00 $222.75 On Sale!
GSKP-184-H
Master Kit - Ideal for stand-up work. Can be used for full width fusing or spot fusing, or for close detail work such as percise flashing and lap fusing. Kit includes: Ap-54 torch, EX-4B and EX-18B Extension, EP-80G regulator, BP-4TE and BP-6TE tips, MP-10 torch stand, HEF-25 hose and MP-1 lighter.
Quantity   
KP118H.jpg GSKP-118-H - KIT, LP reg, BP-6TE large tip
$255.10 $186.25 On Sale!
GSKP-118-H
This Goss Roofer's torch kit is made up of our popular AP-54 Ready-Flame combination torch, EX-18B - 18 inch extension, BP-6TE tip end (300,000 BTU), EP-80G regulator, MP-10 torch stand, HEF-25 hose and MP-1 spark lighter. It is perfect for stand-up full width fusing. Provides plenty of heat for any modified job.
Quantity   
KP118H.jpg GSKP-118M-H - KIT, LP reg, BP-66 ignitor tip
$283.90 $207.25 On Sale!
GSKP-118M-H
This Goss Roofer's torch kit is made up of our popular AP-54 Ready-Flame combination torch, EX-18B - 18 inch extension, BP-66 ignitor tip end (300,000 BTU), EP-80G regulator, MP-10 torch stand, HEF-25 hose and MP-1 spark lighter. It is perfect for stand-up full width fusing. Provides plenty of heat for any modified job.
Quantity   
KP118H.jpg GSKP-218-H - KIT, LP reg, double burner tips
$313.50 $228.75 On Sale!
GSKP-218-H
This Goss Roofer's torch kit is made up of our popular AP-54 Ready-Flame combination torch, EX-18DB - 18 inch double head extension (bent), 2 ea BP-6TE tip ends (600,000 total BTU's), EP-80G regulator, MP-10 torch stand, HEF-25 hose and MP-1 spark lighter. It is perfect for stand-up full width fusing. Provides plenty of heat for any modified job.
Quantity   
KP-600.jpg GSKP-600 - KIT, LP fuser, hand adj burner
$1,108.00 $808.75 On Sale!
GSKP-600
KP-600 Delux Fuser Kit containes: 5 adjustable burners, automatically controlled pilot flame with instant brush flame at the squeeze of a lever, windshield to help guard against flame deviation, detachable handle, adjustable roll hooks to position roll from burners, two large diameter outer burners for improved seam fusing, handle rest that enables operator to tilt burners upright when pilot flame is on, EP-80G regulator, HEF-35, 35 ft hose. Weighs 60 lbs and can be shipped UPS
Quantity   
KP300.jpg GSKP-300 - KIT, LP fuser w/5 burners
$921.30 $672.50 On Sale!
GSKP-300
KP-300 Fuser Kit containes: 5 adjustable burners, windshield to help guard against flame deviation, detachable handle, adjustable roll hooks to position roll from burners, two large diameter outer burners for improved seam fusing, handle rest that enables operator to tilt burners upright when pilot flame is on, EP-80G regulator, HEF-35, 35 ft hose. Weighs 60 lbs and can be shipped UPS
Quantity   
KP350QH.jpg GSKP-350Q-H - KIT, LP REG
$376.30 $274.75 On Sale!
GSKP-350Q-H
GOSS MASTER COMBO KIT - Combination torch kit combines the 18 inch long heavy duty stand-up torch and newly designed detail torch with quick connect adaptors for fast torch changeover - Kit includes AP-111 and AP-55 torches, EP-80G regulator, HEF-25 hose, BRS-776M & F, and MP-1 lighter.
Quantity   
KPQ-2H.jpg GSKPQ-2H - KIT, air-LP ignitor
$213.60 $155.75 On Sale!
GSKPQ-2H
Ready Flame Kit includes: GP-300BF Torch and Q-12H hose. Hose adapts torch for use on refillable propane cylinders. Torch is designed for vapor withdrawal propane cylinders.
Quantity   
Q-12H.jpg GSQ-12H - HOSE, 12ft
$75.30 $56.50 On Sale!
GSQ-12H
HOSE, 12ft - Adapts GP-300BF to large cylinder
Quantity   
MP-1.png GSMP-1 - LIGHTER, Single flint
$4.10
GSMP-1
Single flint lighter (flint included)
Quantity   
MP-70.jpg GSMP-70 - PLIERS, bitumen gripping
$37.40 $30.00 On Sale!
GSMP-70
PLIERS, bitumen gripping - Ideal for holding hot material when setting roll or patching. Welded steel construction
Quantity   
MP-2-5.png GSMP-2-5 - FLINTS, (holder of 5 flints)
$2.90
GSMP-2-5
Holder of 5 flints for MP-1 lighter.
Quantity   
fp-540.jpg GSFP-540 - FURNACE, LP Floor Type
$252.20 $184.25 On Sale!
GSFP-540
This Goss Floor Furnace is great for lead melting with a brush flame burner. Output is approx. 43,200 BTU's and uses about two pounds of propane per hour. The furnace stands 8 inches and weighs 8 lbs. For propane only.
Quantity   
fp-s2.jpg GSFP-S1 - WINDSHIELD, Straight
$37.10 $29.75 On Sale!
GSFP-S1
To help keep the flame confined on windy days, the Goss Wind Shield is just the thing. The FP-S1 is a straight sided wind shield with a diameter of 7 5/8 inch. The FP-S2 is a spun wind shield with a top diameter of 9 1/8 inch. The FP-S2 is shown
Quantity   
fp-s2.jpg GSFP-S2 - WINDSHIELD, Spun
$79.90 $60.00 On Sale!
GSFP-S2
To help keep the flame confined on windy days, the Goss Wind Shield is just the thing. The FP-S2 is a spun wind shield with a top diameter of 9 1/8 inch. The FP-S2 is shown
Quantity   
ex-4b.jpg GSEX-P4 - EXTENSION, Bent Steel
$17.00
GSEX-P4
The Goss EX-P4 is a bent 4 inch steel extension that is designed to be screwed onto the AP-55 handle with one of the tip ends added.
Quantity   
DP-10.jpg GSDP-9 - SOLDING IRON, Sm Pyramid Copper
$181.10 $132.25 On Sale!
GSDP-9
The Goss DP-9 Soldering Iron features adjustable pencil point flame, durable steel construction, replaceable copper ends and a removable stand.
Quantity   
Powered By
shopsite®
Shopping Cart Software